Varenr.:

Miniature oval head cutters are used for fine cutting work, such as with SMT, or work under a microscope.

Unfortunately this combination is not accessible

Varenr.:

Oval head cutters are extremely popular. Used for general purpose cutting. Strong. Versatile.

Unfortunately this combination is not accessible

Varenr.:

These cutters have more head material for greater cutting capacity. General purpose.

Unfortunately this combination is not accessible

Varenr.:

Used only for exceptionally fine cutting work when access to the cutting area is difficult.

Unfortunately this combination is not accessible

Varenr.:

Pointed head allows for increased cutting access yet has sufficient strength to avoid tip breakage when used within its capacity. Most popular cutters.

Unfortunately this combination is not accessible

Varenr.:

Extra long jaw for possibly cutting multiple leads.

Unfortunately this combination is not accessible

Varenr.:

Tip cutter with deep relief for an exceptionally low profile. Short sturdy jaw. Razor Flush^® cutting edges.

Unfortunately this combination is not accessible

Varenr.:

MOst popular tip cutter. Jaw is twice as long as jaw of standard cutters. Jaw is slim with a low, relieved profile. Razor Flush^® cutting edges.

Unfortunately this combination is not accessible

Varenr.:

SMT cutter. Extraordinarily small, fine cutting edges and fine tip. Often used under a microscope. Removes individual leads from fine pich components. Razor Flush^® cutting edges.

Unfortunately this combination is not accessible

Varenr.:

Same as the TT-x070 model except wider jaw and wider tip for extra durability. Razor Flush^® cutting edges.

Unfortunately this combination is not accessible

Varenr.:

Standoff cutters cut leads to a predetermined length. Standoff length available from 0.5mm to 3mm. Includes unique anti-dulling protection. Set screw prevents cutting edge from hitting the standoff leg after a cut has been made.

Unfortunately this combination is not accessible

Varenr.:

Standoff cutters cut leads to a predetermined length. Standoff length available from 0.5mm to 3mm. Includes unique anti-dulling protection. Set screw prevents cutting edge from hitting the standoff leg after a cut has been made.

Unfortunately this combination is not accessible

Varenr.:

Largest cutting head. Robust. Excellent in cutting several leads in a single cut. Relieved for enhanced visibility.

Unfortunately this combination is not accessible

Varenr.:

An SMT cutter with a very small cutting head. Used for exceptionally fine cutting. Relieved for maximum accessibility.

Unfortunately this combination is not accessible

Varenr.:

Most popular angulated cutter. Small cutting head with relief for excellent visibility. Durability combined with fine cutting.

Unfortunately this combination is not accessible

Varenr.:

An SMT cutter. Steep 70º angle with a very fine cutting head allows special access.

Unfortunately this combination is not accessible

Varenr.:

Large cutting edge with pointed tip. Short jaw for enhanced control.

Unfortunately this combination is not accessible

Varenr.:

Long, very narrow jaw with miniature opposing cutting edges at end permit cutting in highly confined areas.

Unfortunately this combination is not accessible